Edit A Port Template - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Edit a Port Template

Copyright © 2010, Juniper Networks, Inc.
See "Detect and Resolve Configuration Conflicts" on page 648.
To edit a customized port template's CoS parameters:
Select a customized port template from the list, click the Customize Port Template
1.
button and choose
Edit Port Template
displayed with a list of devices on which the template has been applied. Click
you want to proceed with the modification, else click
To modify the default description, type a description in the
2.
To modify the default scheduler map name, type a name in the
3.
field.
To edit scheduler settings, click
4.
Specify the following:
Scheduler name
Transmit Rate—Select one:
parameter, Percent and enter a value, or
bandwidth available.
Buffer Size—Transmit Rate—Select one:
the parameter, Percent
buffer available.
Priority—Select a value from the list.
Click to save the settings or
OK
Click to create the customized port template.
5. Save
See "Detect and Resolve Configuration Conflicts" on page 648.
. The Confirm Edit Port Template screen is
Edit Scheduler . The Edit Scheduler screen is displayed.
if you do not want to configure the
Unconfigured
Remainder
Unconfigured
and enter a value, or Remainder
to cancel all modifications.
Cancel
Chapter 15: Role-based Port Templates
OK
.
Cancel
field.
Description
Scheduler Map
to assign the remaining
if you do not want to configure
to assign the remaining
if
Name
649