Figure 95: Configure Tokyo Route For Rb Site-To-Site Vpn, Mk; Figure 96: Configure Tokyo Trust Route For Rb Site-To-Site Vpn, Mk - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
NOTE: ScreenOS 5.0 devices display both destination-based and
source-based routing tables. ScreenOS 5.1 and later devices display
destination-based, source-based, and source interface-based routing
tables.
Configure a route from the untrust interface to the gateway, and then click OK.
16.

Figure 95: Configure Tokyo Route for RB Site-to-Site VPN, MK

Configure route from the trust zone to the tunnel interface, and then click OK.
17.

Figure 96: Configure Tokyo Trust Route for RB Site-to-Site VPN, MK

Your routing table should appear.
Chapter 12: Configuring VPNs
619

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.4

Table of Contents