Figure 67: Job Manager Module - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.
Name of the command
Date and time the command was sent
Completion status for each device that received the command
Detailed description of command progress
Command output, such as a configuration list or CLI changes on the device
NOTE: Job Manager configuration summaries and job information details
do not display passwords in the list of CLI commands or XML script for
administrators that do not have the assigned activity "View Device
Passwords". By default, only the super administrator has this assigned
activity.
You can initiate directives from multiple locations in the NSM UI, including the Devices
and Tools menus in the NSM toolbar (to access the Update directive, from the File menu,
select Devices > Configuration > Update Device Configuration). The Job Manager
module is shown in Figure 67 on page 259.

Figure 67: Job Manager Module

Job Manager includes the following utilities and information:
View Controls—Use View controls to set the information level you want displayed in
Job Manager:
Expand All displays all devices associated with a directive type.
Collapse All displays the directive type.
Job Type (Directive) List—Displays the job type (directives) and associated timestamp
completion status information. All current and completed jobs appear, including device
Chapter 6: Updating Devices
259