Figure 34: Adding A J Series Cluster; Figure 35: Adding The First Member To A J Series Cluster; Modeling The Cluster Members - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
162

Figure 34: Adding a J Series Cluster

Click OK.
3.
The new cluster appears in the Device Manager.

Modeling the Cluster Members

Right-click on the cluster icon and select New > Cluster Member from the list.
1.
In the New Cluster Member dialog box, enter a name and color for the cluster member,
2.
and select the Model Device radio button.
Check the Keep Adding Other Cluster Members box and leave the Member ID as 0.
3.

Figure 35: Adding the First Member to a J Series Cluster

Click Next to finish adding the first member.
4.
Copyright © 2010, Juniper Networks, Inc.