Table of Contents
Advertisement
Network and Security Manager Administration Guide
372
Enter a comment or description.
4.
Select a color from the drop-down list.
5.
Enter the extension types for the profile.
6.
Select
OK.
7.
Command Lists
A command list defines various commands to be executed in the system for different
protocols that you can permit or deny. You can create a new command list profile.
Select
>
1.
Object Manager
Select
The
+.
New Command List Profile
2.
Enter a name for the profile.
3.
Enter a comment or description.
4.
Select a color from the drop-down list.
5.
Enter the list of commands for the profile.
6.
Select
OK.
7.
URL Patterns
You can create a URL pattern by listing different URLs to be permitted or denied. To
create and view URL patterns:
Select
>
1.
Object Manager
and create a new URL pattern.
Select
+ .
The
New URL Pattern
2.
Enter a name for the profile.
3.
Enter a comment or description.
4.
Enter the URLs that make up the pattern.
5.
Select
OK.
6.
URL Categories
A URL category is a list of URL Patterns that belong to the same category. To create a
URL category:
Select
>
1.
Object Manager
Predefined UTM URL Categories on top and Custom UTM URL Categories below. You
can only view but not edit the listed predefined categories. You can create and edit
your own categories.
Select
+
in the Custom UTM URL Categories table. The
2.
opens.
Enter a name for the category.
3.
>
>
UTM
Misc
Command List.
window opens.
>
>
UTM
Misc
URL Patterns.
window opens.
>
>
UTM
Misc
URL Category.
You can view all the URL patterns
NSM displays two tables:
New URL Category
window
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
