Table 73: Vsd Counter Details; Table 74: Rto Counters Details; Viewing Rto Counter Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Table 73: VSD Counter Details

Item
Device
Number of Units
State Change Counter
Init Counter
Master
Primary BackUp
BackUp
Ineligible
InOperable
Master Conflict
Primary Backup Conflict
Tx Heartbeat
Rx Heartbeat

Viewing RTO Counter Details

Click the Counters tab to view specific information about your RTO counters. Table 74
on page 695 describes the information that is available from the RTO counters view:

Table 74: RTO Counters Details

Item
Device
Member ID
Status
Direction
Lost Heartbeat
Counter to Active
Description
The devices that are associated with the VSD or RTO.
The number of units associated with the VSD or RTO.
The number of times a device changes operational states.
The transient state of a VSD or RTO group member while it was in
the process of joining the VSD or RTO group.
The number of master devices.
The number of primary backup devices.
The total number of backup devices.
An administrator purposefully assigned a device so that it cannot
participate in selecting a new master device.
A VSD or RTO group device has an internal problem.
The number of conflicts that occurred on the master device.
The number of conflicts that occurred on the primary backup device.
The number of transmitted heartbeats on the devices.
The number of received heartbeats on the devices.
Description
The devices that are associated with the RTO.
The member identification associated with this RTO.
The current status of the RTO: Active or Down.
The direction of the RTO: In or Out.
The number of heartbeats not received from the RTOs peers.
The number of times that the RTO was placed to Active.
Chapter 17: Realtime Monitoring
695