Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual page 649

Copyright © 2010, Juniper Networks, Inc.
Add the local user object. In the Object Manager, select User Objects > Local Users.
3.
Click the Add icon and select User. The New Local User dialog box appears. Configure
the following, then click OK.
For Name, enter jhansen.
For Color, select orange.
For Comment, enter reseller group.
Select Enable, then select IKE.
For IKE settings, enable User FQDN and enter the e-mail address
jhansen@company.com.
Add a Local User Group. In the Object Manager, select User Objects > Local User
4.
Groups. Click the Add icon to display the New Local User Group dialog box. Configure
the following, then click OK:
For Name, enter Reseller User Group.
For Comment, enter Reseller VPN XAuth RADIUS.
For color, enter green.
Add jhansen as a member.
Add a Network address object to represent the network used by Reseller group. In the
5.
Object Manager, select Address Objects, then click the Add icon and select Network.
The New Network dialog box appears. Configure the following, then click OK:
For Name, enter reseller1.
For IP Address/Netmask, enter 10.2.2.0/24.
For color, select cyan.
For Comment, enter Reseller Group.
Add an address object to represent the FTP Server. In the Object Manager, select
6.
Address Objects, then click the Add icon and select Host. The New Host dialog box
appears. Configure the following, then click OK:
For Name, enter rsl-svr1.
For Color, select green.
For Comment, enter FTP Server.
Select IP, then enter the IP Address 10.1.1.5.
Add a NetScreen-208 security device named "Bozeman." This is the device protects
7.
the FTP server. Configure the Bozeman device with the following interfaces:
Ethernet1 is the Trust IP (10.1.1.1/24) in the Trust zone.
Ethernet3 is the Untrust IP (2.2.2.2/24) in the Untrust zone.
Chapter 12: Configuring VPNs
599