Figure 74: Attack Update Summary; Example: Confirm Idp Engine Version; Scheduling Security Updates - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Example: Confirm IDP Engine Version

Scheduling Security Updates

296
You can also download the new detector engine automatically. See "Scheduling Security
Updates" on page 296.
To see the version of the IDP engine that is currently running on an ISG2000 or ISG1000
device:
Select Tools > View/Update NSM Attack Database. The Attack Update Manager
1.
wizard appears.
Click Next. The Attack Update Summary displays information about the current version
2.
downloaded on the GUI Server and the latest version available from Juniper Networks.
See Figure 74 on page 296.

Figure 74: Attack Update Summary

Click Cancel to exit the Attack Update Manager.
3.
For security devices running ScreenOS 5.0.0-IDP1, 5.1 and later, and IDP 4.0 and later, J
Series devices, SRX Series devices, and for MX Series devices, you can configure the NSM
system to automatically update the attack object database on the GUI Server and on
those devices.
For ScreenOS devices running ScreenOS 5.0 (except ScreenOS 5.0.0-IDP1), NSM does
not automatically install new attack objects on the device but instead flags the device
for manual updating using the UI.
Copyright © 2010, Juniper Networks, Inc.