Example: Adding A Vsys Cluster - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
166
member contains the global information. Although a cluster can have only two
members, a root vsys device can support more than two vsys devices.

Example: Adding a Vsys Cluster

In this example, you add a vsys cluster with two members and two vsys.
Add the cluster device:
1.
a. In the main navigation tree, select Device Manager >Devices.
b. Click the Add icon and select Cluster. The new cluster dialog box appears.
c. Configure the following information:
For Name, enter Paris Cluster.
For OS Name, select ScreenOS/IDP.
For Platform, select ns5400.
For OS Version, select 5.1.
d. Click OK to save the new cluster object.
Add cluster members:
2.
a. In the main display area, right-click Paris Cluster and select New > Cluster Member.
The New Cluster Member dialog box appears.
b. Configure the cluster members OfficeA and OfficeB as shown in Figure 38 on
page 167.
As you add each cluster member, NSM automatically creates both the cluster member
and the vsys cluster member.
Copyright © 2010, Juniper Networks, Inc.