Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual page 870

Network and Security Manager Administration Guide
820
You can attach or embed the report in the e-mail by uncommenting a specific line in
. You can also deliver multiple reports in separate mail messages or in a single
email.sh
collated one.
#########################################################################
# CODE
#########################################################################
dir=`dirname $0`
cd $dir
# Each report in $1 is mailed as an attachment.
/usr/bin/perl -w email.pl -d $1 -o /dev/null
# Each report in $1 is embedded into an email and mailed.
#/usr/bin/perl -w email.pl -d $1 -embed -o /dev/null
# Each report in $1 is attached to a collated message and the collated message
# is mailed
#/usr/bin/perl -w email.pl -d $1 -collate -o /dev/null
# Each report in $1 is embedded into a collated message and the collated message
# is mailed
#/usr/bin/perl -w email.pl -d $1 -collate -embed -o /dev/null
# Don't change this line
exit $?
The required SMTP settings are provided in email.pl.
##################################################################
# CONFIGURABLE PARAMETERS SECTION (CHANGEABLE)
##################################################################
# From address, don't delete \ before the @ separator
my $from_addr = "user\@localhost.localdomain";
# To address, don't delete \ before the @ separator
my $to_addr = "remote-user\@somewhere.net";
# Email server: not required if sendmail is configured for mail transport
my $email_server = "everywhere.net";
# Subject
my $subject = "Reports are here!";
# Body text for emails with reports as attachments
my $body_text_attach = "Attached reports";
# Body text for emails with reports embedded
my $body_text_embed = "Embedded reports";
# Mail transport agent
my $send_mail_prog = "/usr/sbin/sendmail -t";
# Directory prefix for report directory
my $prefix = "/usr/netscreen/GuiSvr/var";
# Report extension type
my $type = "html";
# Mail output file: Capture sent email in this file, /dev/stdout for screen
my $mail_ofile = "/dev/stdout";
###################################################################
NOTE: The email.pl
the reports. The actual mailing is done by sendmail or other Mail Transfer
Agent (MTA). If you require authentication to send these reports, you must
configure the authentication parameters as part of the MTA configuration.
If you are using the FTP script to send you reports, you will also need to add
values for the remote host, userid and password for the FTP account in the
file.
ftp.sh
and emailReports.sh scripts only do MIME formatting of
Copyright © 2010, Juniper Networks, Inc.