Using Script Required And Optional Format-Specific Filters - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
Script Multiple
--script-name No
--error-handling No
808

Using Script Required and Optional Format-Specific Filters

You can use the following required format-specific filters for exporting to a script:
Required
Yes
Yes
The script format has no optional format-specific filters.
Meaning
Specify the script name. The script must be located in
/usr/netscreen/DevSvr/var/scripts/<domain>/<script-name>
For example:
/usr/netscreen/DevSvr/var/scripts/global/<script-name>
or
/ usr / netscreen/DevS vr / var / scri p ts/ gl o bal/<subdomai n >/<scri p t-name>
Specifies error handling for the specified script. When
using this filter, you must specify one of the following
error-handling filters:
--skip
Directs the system to skip any log for which the script
had an error.
--retry
Directs the system to try the action again for the
same log. When using this filter, you must also
specify:
--retry-interval
Specifies the number of seconds until the action is
tried again.
--num-retries
Specifies the maximum number of retries to attempt
before moving on to the next log record.
Copyright © 2010, Juniper Networks, Inc.