Table of Contents
Advertisement
8
Adding a Juniper
NSM Profiler
Scanner
Step 1
Step 2
Step 3
Step 4
M
ANAGING
P
ROFILER
The Juniper Networks NSM console passively collects valuable asset information
from your network through deployed Juniper IDP sensors. STRM connects to the
Profiler database stored on the NSM server to retrieve these records. The STRM
server must have access to the Profiler database. STRM supports NSM versions
2007.1r2 to 2007.2r2. For more information, see your vendor documentation.
STRM collects data from the PostgreSQL database on the NSM using JDBC. For
STRM to collect the data, access to the profilerDb from the STRM host must be
granted. This access is provided in the pg_hba.conf file, which is typically located
in /var/netscreen/DevSvr/pgsql/data/pg_hba.conf on the NSM host.
This chapter includes information on configuring a Juniper scanner including:
Adding a Juniper NSM Profiler Scanner
•
Editing a Profiler Scanner
•
Deleting a Profiler Scanner
•
To add a Juniper NSM Profiler scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Click Add.
The Add Scanner window appears.
Enter values for the following parameters:
Table 8-1 Scanner Parameters
Parameter
Description
Scanner Name
Specify the name you wish to assign to this scanner. The name
may be up to 255 characters in length.
Managing Vulnerability Assessment
J
UNIPER
S
CANNERS
NSM
Advertisement
Table of Contents
