Example: Creating A Custom Service And Group - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Example: Creating a Custom Service and Group

In this example, you create a custom service object to represent the Ident service and a
custom service group that includes this service.
To create the custom Ident service:
In the main navigation tree, select Object Manager > Service Objects > Custom
1.
Service Objects.
In the main display area, click the Add icon and select Service. The New Service dialog
2.
box appears.
Configure the following:
3.
a. For Name, enter Ident
b. For Timeout, select Default.
c. For Color, select blue.
d. Enter a comment, if desired.
In the Non-ICMP Services Entries area, click the Add icon and select TCP. The New
4.
Service Entry dialog box appears. Configure the following:
a. For Source Port, select Range.
b. For Source Port Range, enter 0 to 65535.
c. For Destination Port, select Specific.
d. For Specific Port, enter 113.
Click OK to save the new service entry, then click OK again to save the new service
5.
object.
In the main display area, click the Add icon and select Group. The New Service Group
6.
dialog box appears. Configure the following:
a. For Name, enter Remote Mail.
b. For Color, select pink.
c. Enter a comment, if desired.
d. In the Non-members area, select the following services (press and hold Ctrl to select
multiple services):
Chapter 8: Configuring Objects
391