Table 54: Policy Distribution Items - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Table 54: Policy Distribution Items

Item Description
Policy ID The unique identifier of the policy.
Source IP The IP address of the host generating the session.
Source IP Mask The IP address mask for the host or network generating the session.
Destination IP The IP address of the host receiving the session.
Destination IP Mask The IP address mask for the host or network receiving the session.
Source Zone Zone of the host generating the session.
Destination Zone Zone of the host receiving the session.
VPN Name Name of the virtual private network.
Service The application or service associated with the policy. Examples include
Mail, FTP, SNMP, AOL, Telnet, and LDAP.
Action The activity to be performed, such as Permit, Deny, or Tunnel.
Total Connections The total number of data connections.
Connection Rel% The relative percentage of connections.
Delta Connection The total numerical difference between the current connection value
and the previous connection value.
Total Bytes The total number of data bytes.
Bytes Rel% The relative percentage of bytes.
Delta Bytes The total numerical difference between the current bytes value and the
previous bytes value.
Total Packets The total number of data packets.
Packets Rel% The relative percentage of packets.
Delta Packets The total numerical difference between the current bytes value and the
previous packets value.
Policy Name The name of the policy.
Adjusting Data Depicted Graphically
You can adjust all elements depicted in the graph, including the policies, data values
(such as absolute or delta), and type of data (bytes in or out, packets in or out, utilization).
Chapter 17: Realtime Monitoring
669