Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 24: CSV File Information for Devices with Dynamic IP
Addresses (continued)
Field Name
Type
License Key Model
String
First Conn OTP
String
Device Admin Name
String
Device Admin
String
Password
Example: Using an Excel File to Add Multiple Dynamic IP Devices
To use an Excel file for adding many device with dynamic IP addresses:
Copy and open the
bulkadd_nonreachable-sample.csv
1.
bulkadd_nonreachable-DMI-sample.csv
and Security Manager/utils
Using one row for each device you want to add, enter the required values for the device.
2.
You can also provide optional values, if desired.
Save the file to a location on your local drive.
3.
Example: Using a Text File to Add Multiple Dynamic IP Devices
To add four devices that use dynamic IP addresses, create a text file with the following
text:
switch1,red,junos-es,j2320,none,9.0,off,none,netscreen,root,netscreen
switch2,red,junos-es,j2320,none,9.0,off,none,netscreen,root,netscreen
switch3,red,junos-es,j2320,none,9.0,off,none,netscreen,root,netscreen
switch4,red,junos-es,j2320,none,9.0,off,none,netscreen,root,netscreen
Save the file as a
file.
.csv
Undeployed Devices
For undeployed devices (ScreenOS 5.x and later releases only), create a
the parameters shown in Table 25 on page 175.
Table 25: CSV File Information for Undeployed Devices
Field Name
Type
Name
String
Color
String
OS name
String
Required
Acceptable Values
yes
Range of values defined in
yes (when
using
ScreenOS)
yes
yes
Must be a minimum of 9 characters
file located in the
directory.
Required
Acceptable Values
yes
Valid character
yes
black, gray, blue, red, green, yellow,
cyan, magenta, orange, pink
yes
ScreenOS
Chapter 4: Adding Devices
file
dcf
file or the
C:/Program Files/Network
.csv
file with
175
Advertisement
Table of Contents
