Validating The Csv File; Importing Many Devices - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Validating the CSV File

Importing Many Devices

Copyright © 2010, Juniper Networks, Inc.
Table 25: CSV File Information for Undeployed Devices (continued)
Field Name Type
Device Serial String
Number
Example: Using an Excel File to Add Multiple Modeled Devices
To edit an Excel file for adding many modeled devices:
Copy the
1. bulkadd_model-sample.csv
directory. The header row at the top defines the settings.
Security Manager/utils
Using one row for each device you want to add, enter the required values for the device.
2.
You can also provide optional values, if desired.
Save the file to a location on your local drive.
3.
Example: Using a Text File to Add Multiple Modeled Devices
To add and model three security devices, create a text file with the following text:
dev13,orange,ScreenOS,ns5XP,none,5.0,off,advanced,netscreen123,static,10.10.30.5,32,10.10.30.
1,,,123456abc,netscreen,netscreen,,,on
dev14,green,ScreenOS,ns50,none,5.0,off,advanced,netscree123,pppoe,,,,root,netscreen,,1netscreen,netsc
reen1,,,off
dev15,red,ScreenOS,ns204,none,5.0,off,advanced,netscreen123,dhcp,,,,,,,2netscreen,netscreen2,,,off
Save the file as a file.
.csv
When you add the device, NSM validates the configuration information in the
and creates a Validation Report. The report lists any incorrect or duplicate configurations,
and indicates the exact line that contains invalid data.
NOTE: The Validation Report displays only the first error in the line. If the line
contains additional errors, those errors do not appear in the Validation Report.
Select Cancel to quit the Add Many Devices process, or select Add Valid Devices to begin
adding the devices for which you have provided valid device configurations. If the
Validation Report listed incorrect configurations, you can still select Add Valid Devices;
however, only the devices with correct configurations are added. If the
duplicate configurations, NSM ignores the duplicates.
After you have added devices, you cannot roll back or undo your changes. To edit or
delete a device, select the device in the UI and make the necessary changes.
The import process differs between devices that use static IP addresses and devices
that use dynamic IP addresses:
Required Acceptable Values
yes if restrict to serial Valid device serial number
is on
file located in the
Chapter 4: Adding Devices
C:/Program Files/Network and
file
.csv
file contains
.csv
177