Copyright © 2010, Juniper Networks, Inc.
Select one or more devices and specify SSH v2 credentials for them.
2.
Verify the RSA key fingerprint for each of the devices.
3.
The wizard detects each selected device and adds it to NSM. The wizard then imports
the device configuration, hardware, software, and license inventory into NSM.
After adding a device to NSM, you can perform the following:
View and edit device configuration: You can use the
editor to view and edit a device's configuration.
Update device configuration: You can use the
configuration on the device.
View device details in the topology map: You can view details of a managed device in
the topology view.
View link details between devices in the topology map: You can use the View details
item on a selected link in the topology map to view link details between two managed
devices, where one of the devices is the source and the other is the destination.
Chapter 14: Topology Manager
Edit
menu to open the configuration
menu to update the changed
Update
643