Configuring Security Policies; Figure 82: Displaying The Select Visible Columns Dialog Box - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 82: Displaying the Select Visible Columns Dialog Box

Select the visible columns (Destination, Service, Action, NAT, and so on) that you
3.
want to include in the Custom Mode view.
Click OK. The Custom Mode view shows the columns you selected from the Select
4.
Visible Columns dialog box.
Viewing and Editing Custom Policy Fields
NSM allows you to create multiple fields under
fields to save metadata, and you can edit and filter the values in each of these custom
fields. You must create and save these custom policy fields as objects under the Object
Manager before you can use them in policy. See "Configuring Custom Policy Fields" on
page 379 for details.
Chapter 9: Configuring Security Policies
. You can customize this
Rule Options
437