Viewing Additional Server Status Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
702
Table 80: Server Monitor (Machine-wide Info) Data (continued)
Indicator Description
Status Status of the server based on CPU or memory utilization:
OK
Warning
Critical
Down
Note: By default, the Status field for each server appears Green (OK) if
the usage on either the CPU, memory, or disk is less than 90%. It appears
Yellow (Warning) if the usage on either the CPU, memory, or disk is
greater than 90%. You can edit the settings that apply for the Status
indicators using Tools>Preferences>Alert Settings.
CPU Status based on CPU utilization:
OK (CPU usage < 90%)
Warning (CPU usage = 90-95%)
Critical (CPU usage > 95%)
N/A (when the server is down)
Mem Status based on memory utilization:
OK (memory usage < 99%)
Warning (memory usage > 99%)
Critical (memory usage = 100%)
N/A (when the server is down)
CPU Usage Percentage of CPU used.
Peer Device Server State of the server's peer server (only applicable if you have added a
State secondary server and configured it in an HA Cluster).
Active Server Whether the currently active server is the primary or secondary server in
an HA Cluster.
Last GUI Server Time of day that the GUI Server database was last replicated to its peer
Replication Time server.
You can sort data in the Server Monitor according to any column header by clicking that
column.

Viewing Additional Server Status Details

If you are interested in monitoring additional details about your server's status, you can
view the Server Detail Status window by double-clicking any of the servers that appear
in the Server Monitor. You can also right-click anywhere on the Server Monitor and select
View Details.
Table 81 on page 703 describes information available in the Server Detail Status:
Copyright © 2010, Juniper Networks, Inc.