Table 17: Changes To Edit Devices, Device Groups, & Templates Activity; Table 18: Changes To View Devices, Device Groups, & Templates Role - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
88
Export Device Config To File
Import Device Config From File
The Import Device Admins role allows permission to run the Import Admin directive.
A new role (Export/Import Device Config to File) has been created to allow permission
to run the Export Device Config To File and Import Device Config From File directives.
Permissions Changes in Release 2005.3
In Release 2005.3, the Edit Devices, Device Groups, & Templates activity no longer allows
permission to run the directives listed in Table 17 on page 88. Use the activities listed in
the table instead.
Table 17: Changes to Edit Devices, Device Groups, & Templates Activity
Activity
View Configlet
Edit Device Admin
Failover Device
Device BGP Operations
Update AV Pattern
Get Entitlement from Entitlement
Server
Check Config Sync Status
Intranet Controller Operations
In Release 2005.3, the View Devices, Device Groups, & Templates activity no longer
allows permission to run the directive listed in Table 18 on page 88. Use the Device Site
Survey activity instead.
Table 18: Changes to View Devices, Device Groups, & Templates Role
Activity Directives
Device Site Survey Site Survey
Directives
View Configlet
Set Root Admin (4.x device only)
Set Admin Ports (4.x device only)
Set Admin SSH Enable Disable (4.x device only)
Failover
Modify BGP Peer Session
BGP Refresh Route
BGP Update Route on Peer
Update AV Pattern
Get Entitlement from Entitlement Server
Check Config Sync
Connect To Intranet Controller
Disconnect From Intranet Controller
Copyright © 2010, Juniper Networks, Inc.