Adding Devices With Dynamic Ip Addresses; Screenos Devices - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Adding Devices with Dynamic IP Addresses

118
To import an SA or IC device with a known IP address:
From the Configure panel of the NSM main navigation tree, select Device Manager >
1.
Devices
Click the Device Tree tab, click the New button, and select Device. The New Device
2.
dialog box appears.
Select Device is Reachable and click Next.
3.
Enter the following connection information:
4.
Enter the IP address of the device.
Enter the username of the device administrator.
Enter the password for the device administrator.
Select SSH V2 as the connection method.
Ensure that the TCP port number is 22.
Click Next. The Verify Device Authenticity dialog box appears. The Add Device wizard
5.
displays the RSA Key FingerPrint information. To prevent man-in-the-middle attacks,
you should verify the fingerprint using an out-of-band method.
Click Next to accept the fingerprint. The Detecting Device dialog box opens.
6.
After the wizard displays the autodetected device information, verify that the device
7.
type, OS version, and the device serial number are correct. The wizard also detects
the hostname configured on the device. You can either use the hostname as the NSM
device name or you can enter a new name in the text box provided.
Click Next after verifying the auto detected device information.
8.
Click Finish to add the device to the NSM UI. The device appears in the Devices
9.
workspace.
A dynamic IP address is an IP address that changes. To add a device that uses a dynamic
IP address, the device must support NACN.

ScreenOS Devices

To import a ScreenOS device with an unknown IP address:
From the domain menu, select the domain in which you want to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select Device to open the Add Device wizard.
3.
Select Device Is Not Reachable, and then click Next.
4.
Enter a name for the device and select a color to represent the device in the UI.
5.
Copyright © 2010, Juniper Networks, Inc.