Table of Contents
Advertisement
Creating Custom Application Objects
Copyright © 2010, Juniper Networks, Inc.
Supported Platforms
Application signature definition (including Client-to-Server DFA and PCRE patterns
and Server-to-Client DFA and PCRE patterns)
Minimum data length which is the minimum number of layer-7 data bytes that the first
data packet requires to make a successful match. This applies to both Client-to-Server
and Server-to-Client packets.
You can create, edit, delete, and search for customized application objects under the
Custom Application Objects
application objects to represent applications that are not predefined. To add a custom
application object, in the
Object Manager
Select
Application Objects
1.
Click the Add icon (
+
) to view the
2.
Configure the following parameters in the
3.
Name
—This is a mandatory field.
Application Category
Supported Platforms
select at least one.
—Either a TCP or UDP port is mandatory. You can specify hyphen (-)
Port Ranges
separated port ranges of both types.
Configure the following parameters in the
4.
Port Binding:
Application Type
—Select a predefined or custom application type from the
drop-down list. This is a mandatory field.
—Specify comma separated ports. A range of ports is not allowed.
TCP Port Binding
You must configure either one TCP or UDP port for a custom application.
—Specify comma separated ports. A range of ports is not allowed.
UDP Port Binding
You must configure either one TCP or UDP port for a custom application.
Signature:
Specify a DFA and a PCRE pattern under each of the following sections:
Client-to-server
Server-to-client
You must specify at least one DFA pattern.
tab in the
Application Objects
:
>
Custom Application Objects
New Custom Application
General
—This is a mandatory field.
—Use the
Edit
icon to select supported platforms You must
Detector
Chapter 8: Configuring Objects
window. You can create custom
.
dialog box.
tab:
Tab:
333
Advertisement
Table of Contents
