Table 42: Destination Nat Configuration Options - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Table 42: Destination NAT Configuration Options

Tab Field
General Name
Routing Ri Name
Instance
420
Adding a Destination NAT Object
To add a destination NAT object:
Select Object Manager
1.
dialog box appears. You can add, edit, delete, or search for a destination NAT object
using the icons at the top of this dialog box.
Select ( ) to create a new destination NAT object. The
+
2.
dialog box appears:
Enter a name, color, and comment for the new destination NAT object.
Select ( ) to configure the parameters for the new destination NAT object.
+
The New – Junos Destination NAT
device that performs the translation and define the address pool.
Select a device from the
3.
The devices are listed only if you have previously added these devices to NSM. To
add a device, use the
If a device is not selected, you cannot configure the
Junosdestination-nat
If the proxy ARP functionality is required, select the IP address of the interface, which
4.
accepts the ARP requests, from the
listed, select ( + ) to configure a new value. The
Specify the logical interface on which to configure proxy ARP and its details. For more
information, see "Configuring Proxy ARP" on page 421.
Select ( ) next to
+ Junosdestination-nat
5.
dialog box appears.
You will see a list of values to select from the drop-down list if you have previously
configured address pools.
Table 42 on page 420 lists the fields that are available and the action you need to
perform on each fields.
Function
Descriptive name for the pool.
Specify the routing instance to which
the pool is bound.
> Junos NAT Objects > Destination NAT
dialog box appears. Here, you must select the
drop-down list.
Device
Device Manager .
fields.
drop-down list. If there are no values
Proxy ARP
New Interface
to configure the address pool. The
Action
Type a name for the pool.
Select the routing instance name. The values are
listed only if you have added them previously.
To add a new routing instance to a device, select
Object Manager
. The Destination NAT
New JunosDestination NAT
and
Proxy-ARP
dialog box appears.
New Pool
>
Routing Instance Objects
Copyright © 2010, Juniper Networks, Inc.
.