Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Add a user for NSM that has full administrative rights.
b.
Activate the device in NSM:
2.
In Device Manager, right-click the device and then select Activate Device from the
a.
list.
In the Activate Device dialog box, select Device is deployed, but not reachable,
b.
and then click Next.
In the Specify Name and Device type dialog box, perform the following tasks:
c.
Make a note of the automatically generated Unique External ID for the device.
i.
This ID number represents the device within the management system. The
device administrator will need this ID to configure connectivity between the
device and NSM.
Specify the administrator user name and password for the SSH connection.
ii.
This name and password must match the name and password already
configured on the device.
Specify the First Connection One Time Password (OTP) that authenticates the
iii.
device. Make a note of this password. The device administrator will need it to
configure the connectivity between the device and NSM.
NOTE: All passwords handled by NSM are case-sensitive.
Click Finish to complete the Add Device wizard and include the new device in the
d.
Device Manager list.
Verify in the Device List tab that the new device is visible and has the connection
e.
status "Never connected."
Give the unique external ID and the one-time password to the device manager.
f.
On the device, configure the device to connect with NSM:
3.
Log on to the Junos device.
a.
At the command-line prompt, identify the management system by device name,
b.
device ID, and HMAC.
For devices running the 9.0 version of the operating system, use the following
command syntax:
set system services outbound-ssh application-id <name> secret <string>
services netconf device-id <external-id from nsm> <NSM device server ip>
port 7804
For example:
% set system services outbound-ssh application-id nsm-wei secret 123456789
services netconf device-id abcdef 10.150.42.16 port 7804
Chapter 4: Adding Devices
137
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008