Regular Expression [R] Search Mode; Figure 6: "Starts With" Search Mode Example; Figure 7: "Regular Expression" Search Mode Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.
In the main navigation tree, select Device Manager > Devices, then select the security
1.
devices icon at the top of the Device Tree window.
Press the backslash key (\) to display the search mode window.
2.
Enter S, then enter OR. The UI automatically highlights the first match, OR_EU_208,
3.
as shown in Figure 6 on page 35.

Figure 6: "Starts With" Search Mode Example

Regular Expression [R] Search Mode

Use to locate a value using a regular expression. For example, to locate all DI attack
objects that detect denial-of-service attacks:
In the main navigation tree, select Object Manager > Attack Objects > DI Objects,
1.
and then select the Predefined Attacks tab.
Select the first entry in the column Name, and then press the backslash key (\) to
2.
display the search mode window.
Enter R, and then enter the following characters: DoS|.enial. Figure 7 on page 35 details
3.
this expression:

Figure 7: "Regular Expression" Search Mode Details

The UI automatically highlights the first match; click the down arrow key to highlight the
next match. Both matches are shown in Figure 8 on page 36.
Chapter 1: Introduction to Network and Security Manager
35