Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual page 226

Network and Security Manager Administration Guide
176
Table 25: CSV File Information for Undeployed Devices (continued)
Field Name Type
Platform String
device subtype String
ScreenOS Version String
Transparent Mode String
License Key Model String
First Conn OTP String
Connection Type String
Device IP Address String
Device Netmask String
Device Gateway String
PPPoE User Name String
PPPoE User String
Password
Configlet Password String
Device Admin String
Name
Device Admin String
Password
Telnet Port Integer
SSH Port Integer
Restrict to Serial String
Number
Required Acceptable Values
yes Must be a device platform that
supports ScreenOS 5.x or later release
and configlets (cannot be a
ns5GTADSL device)
yes Set to "none".
yes 5.x, 6.x
yes on, off
yes Range of values defined in
yes Must be a minimum of 9 characters
yes static, pppoe, dhcp, prompt
yes (when connection
type is static)
yes (when connection 8, 24, 28, 32
type is static)
Any valid netmask in CIDR format
yes (when connection
type is static)
yes (when connection
type is PPPoE)
yes (when connection Must be a minimum of 9 characters
type is PPPoE)
no Default to a random string between 9
and 256 characters
yes
yes Must be a minimum of 9 characters
no Default to 23
no Default to 22
yes on, off
Copyright © 2010, Juniper Networks, Inc.
dcf file