Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual page 723

Copyright © 2010, Juniper Networks, Inc.
Table 56: VPN Monitor Table (continued)
Item
Avg. Latency
Availability
Bytes In
Delta Bytes In
Bytes Out
Delta Bytes Out
Packets In
Delta Packets In
Packets Out
Delta Packets Out
Util. (Absolute)
Util. (Delta)
Viewing Active VPN Information
Click the Active VPN tab to view specific information about active VPNs. From the Active
VPN tab, you can view the following details:
Key details describing the VPN (such as name, Policy IP, local and peer gateway IDs
and IP addresses).
Security established on the active VPN.
Time-related statistics (such as lifetime, latency).
Table 57 on page 674 lists the information that is available from the active VPN.
Description
A rolling average of latency, presented in milliseconds.
Percentage of the time a tunnel is up over the last thirty samples.
The number of incoming bytes handled by the protocol through the
security device.
Total numerical difference between the current bytes in value and
the previous bytes in value.
The number of outgoing bytes handled by the protocol through the
security device.
Total numerical difference between the current bytes out value and
the previous bytes out value.
The number of incoming packets handled by the protocol through
the security device.
Total numerical difference between the current packets in value and
the previous packets in value.
The number of outgoing packets handled by the protocol through
the security device.
Total numerical difference between the current packets out value
and the previous packets out value.
Total number of the utilization of the current security device.
Total numerical difference between the current utilization value and
the previous utilization value.
Chapter 17: Realtime Monitoring
673