Table of Contents
Advertisement
Network and Security Manager Administration Guide
178
For devices with static IP addresses, the Add Many Devices wizard automatically
imports the device configurations.
For devices with dynamic IP addresses, you must manually import the device
configurations.
In some cases, you might also need to configure NACN or other features on the physical
device to enable the device to connect to NSM.
After you have added the devices, verify that the device configuration import matches
your expectations. For details, see "Verifying Imported Device Configurations" on page 128.
Adding and Importing Many Devices with Static IP Addresses
For devices with static IP addresses:
From the domain menu, select the domain in which to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select Many Devices. The Add Device wizard appears.
3.
In the Add Device wizard:
4.
Select Device Is Reachable (default).
Specify the location of the CSV file.
Click Next. The Add Device wizard validates the CSV file and provides a Validation
5.
Report:
Select Cancel to quit the Add Many Devices process.
Select Add Valid Devices to begin adding the devices for which you have provided
valid device configurations.
The Add Device wizard adds the valid devices and automatically imports their
configurations.
Adding and Importing Many Devices with Dynamic IP Addresses
For devices with dynamic IP addresses:
From the domain menu, select the domain in which to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select Many Devices. The Add Device wizard appears.
3.
In the Add Device wizard:
4.
Select Device Is Not Reachable.
Specify the location of the CSV file.
Specify the output directory for the
uses a dynamic IP address, NSM creates a
saved to the following GUI Server directory:
file. For each valid device configuration that
.cli
output file. By default, the
.cli
Copyright © 2010, Juniper Networks, Inc.
file is
.cli
Advertisement
Table of Contents
