Viewing Existing Policy Versions; Creating A New Policy Version - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
522
To set the NSM default to policy versioning:
In the NSM GUI, select Tools > Preferences.
1.
Under Object Versioning, check Policy.
2.
NOTE: You can use this window to set NSM to automatically create
versions after changes for devices and shared objects
Click OK.
3.
NSM is set to automatically create a new version after each database change to the
policy objects.

Viewing Existing Policy Versions

This section explains how to use the GUI to view existing policy versions.
NOTE: Some policies or shared objects must exist in NSM before you can
view them.
To view existing policy versions:
In the NSM GUI, right-click on a policy.
1.
In the NSM GUI, select View Versions.
2.
The Version History window displays the version history for the selected policy. You
can use this window to create a new version or work with existing versions. When you
set NSM up for automatic policy versioning, a new version is created each time you
save changes to this object.
Click Close to end your viewing session.
3.

Creating a New Policy Version

This section explains how to use the GUI to create a new policy version.
Some policies or shared objects must exist before you can create a version. See "Setting
NSM to Automatic Policy Versioning" on page 521.
To create a new policy version:
In the NSM GUI, right-click on a policy.
1.
Select View Versions.
2.
Click Create Version.
3.
Optionally, fill in Version Comments and click OK.
4.
The new version appears in the list in the Version History window.
Click Close to save the changes.
5.
Copyright © 2010, Juniper Networks, Inc.