Modeling Vsys Devices - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Modeling Vsys Devices

Copyright © 2010, Juniper Networks, Inc.
From the domain menu, select the domain that contains the root device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select vsys Device. The Add Device wizard appears.
3.
Select the root device for the vsys.
Select a color to represent the vsys in the UI.
Select Import Existing Virtual System From Physical Device.
Click Next. Select the domain in which to import the device.
4.
Click Next. Select the vsys devices to import:
5.
Use SELECT ALL to import all vsys devices from the root device.
Use SELECT NONE to clear all checked vsys devices.
Click Finish to complete the Add Device wizard. NSM automatically imports the
6.
selected vsys configurations, and the new vsys devices appear in the Device Manager
list.
To view the imported configuration, double-click the vsys in Device Manager.
To check the vsys configuration status, mouse over the vsys device in Device Manager,
or check the configuration status in Device Monitor. The device status displays as
"Managed", indicating that the vsys has connected and the management system has
successfully imported the vsys configuration.
Modeling vsys devices is a two-stage process:
Import or model the root device.
Use the Add Device wizard to add the root device to the appropriate domain. For details,
see "Importing Devices" on page 112 or "Modeling Devices" on page 130.
Model the vsys device.
Use the Add vsys wizard to add the vsys device. You can model a vsys on an imported
or modeled root device; however, you cannot update the vsys device configuration
until you have first activated the root device. You must model one vsys device at a
time.
To model a vsys device:
From the domain menu, select the domain that contains the root device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select vsys Device. The Add Device wizard appears.
3.
Select the root device for the vsys.
Select a color to represent the vsys in the UI.
Chapter 4: Adding Devices
149