Cfgtransshow - Brocade Communications Systems 8 Command Reference Manual

2

cfgTransShow

cfgTransShow
Displays information about the current zoning transaction.
Synopsis cfgtransshow
Description Use this command to display the ID of the current zoning transaction. In addition, the command
provides information on whether or not the transaction can be aborted. The transaction cannot be
aborted if it is an internal zoning transaction.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands none
Examples To display the current transaction:
See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow,
cfgTransAbort
102
switch:admin> cfgtransshow
There is no outstanding zone transaction
switch:admin> cfgclear
Do you really want to clear all configurations?
Clearing All zoning configurations...
switch:admin> cfgtransshow
Current transaction token is 271010736
It is abortable
(yes, y, no, n): [no] y
Fabric OS Command Reference
53-1001764-02