Cfgtransshow - Brocade Communications Systems SN3000B Command Reference Manual

cfgTransShow

Displays information about the current zoning transaction.
SYNOPSIS
cfgtransshow
DESCRIPTION
Use this command to display the ID of the current zoning transaction. In addition, the command provides
information on whether or not the transaction can be aborted. The transaction cannot be aborted if it is an
internal zoning transaction.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
None
EXAMPLES
To display the current transaction:
SEE ALSO
cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow,
cfgTransAbort
Fabric OS Command Reference
53-1001764-01
switch:admin> cfgtransshow
There is no outstanding zone transaction
switch:admin> cfgclear
Do you really want to clear all configurations?
(yes, y, no, n): [no] y
Clearing All zoning configurations...
switch:admin> cfgtransshow
Current transaction token is 271010736
It is abortable
cfgTransShow
\
2
109