Configuring An Irf Stack; Configuration Task List - 3Com Baseline 2928 PWR Plus User Manual

The administrator can log in to any slave device from the master device of the stack, and perform
various configurations for the slave device.

Configuring an IRF Stack

Configuration Task List

Perform the tasks in
Table 1-1 Stack configuration task list
Task
Configuring
the master
device of a
stack
Configuring
slave
devices of a
stack
Displaying Topology Summary of
a Stack
Displaying Device Summary of a
Stack
Logging Into a Slave Device
From the Master
Table 1-1 to configure an IRF stack.
Required
Configuring Configure a private IP address pool for a stack and establish the
Global stack, and meantime the device becomes the master device of
Parameters of a the stack.
Stack
By default, no IP address pool is configured for a stack and no
stack is established.
Required
Configuring Stack Configure the ports of the master device that connect to slave
Ports devices as stack ports.
By default, a port is not a stack port.
Required
Configuring Stack Configure a port of a slave device that connects to the master
Ports device or another slave device as a stack port.
By default, a port is not a stack port.
Optional
Display the information of stack members.
Optional
Display the control panels of stack members.
Before viewing the control panel of a slave device, you must
ensure that the username, password, and access right you used
to log on to the master device are the same with those
configured on the slave device; otherwise, the control panel of
the slave device cannot be displayed.
Optional
Log in to the web network management interface of a slave
device from the master device.
Before logging into a slave device, you must ensure that the
username, password, and access right you used to log on to the
master device are the same with those configured on the slave
device; otherwise, you cannot log into the slave device. You can
configure them by selecting Device and then clicking Users
from the navigation tree.
Remarks
1-2