Enabling Hunt Group; Configuring Hunt Group Priority Level; Configuration Example; Configuring Incoming Call Barring - 3Com MSR 50 Series Configuration Manual

2434 C 140: C
HAPTER ALL

Enabling Hunt Group

Configuring Hunt Group
Priority Level

Configuration Example

Configuring Incoming
Call Barring
S C
ERVICES ONFIGURATION
Follow these steps to enable hunt group:
To do...
Enter system view
Enter voice view
Enter voice subscriber line
view
Enable hunt group for the
voice subscriber line
Follow these steps to configure a hunt group priority level:
To do...
Enter system view
Enter voice view
Enter voice subscriber line
view
Configure a priority level for
hunt group
n
Currently, a priority level applies to only the features of call waiting, call
■
forwarding, and hunt group.
By default, the priority levels for hunt group, call forwarding, and calling
■
waiting are 1, 2, and 3 respectively. The smaller the value is, the higher the
priority level is. When you change the priority level of a feature, make sure that
different features have different priority levels.
You must configure the hunt-group enable command on all FXS voice
■
subscriber lines if you want to use the hunt group feature.
Telephone B and Telephone C have the same number, but Telephone B has a
higher priority than Telephone C (the POTS entity priority of Telephone B is
configured in POTS voice view using the priority command). Telephone A calls
Telephone B and Telephone B is busy. In this case, the hunt group service enables
Telephone C to have a conversation with Telephone A.
# Enter voice subscriber line view.
<Sysname>system-view
[Sysname]voice-setup
[Sysname-voice]subscriber-line 2/0
# Enable hunt group.
[Sysname-voice-line2/0] hunt-group enable
When you do not want to receive any incoming call, you can enable incoming call
barring (namely, the Do Not Disturb feature)
The device supports two incoming call barring configuration methods:
Use the command...
system-view
voice-setup
subscriber-line line-number
hunt-group enable
Use the command...
system-view
voice-setup
subscriber-line line-number
hunt-group priority level
Remarks
-
-
-
Required
Disabled by default.
Remarks
-
-
-
Optional
1 by default.