Timing The Bobbin Capsule Lifting - Dürkopp Adler 806N-111-10 Service Instructions Manual

Machine head 111

4.5.3 Timing the bobbin capsule lifting

Fig. 23: Timing the bobbin capsule lifting
(1) - Screws
(2) - Shaft
Proper setting
The bobbin capsule should be at its lifted position when the thread passes
between the bobbin capsule 3 and its holder 4.
To time the lifting of the bobbin capsule:
1. Press the Lift/lower sewing head
 The sewing head lowers.
2. Press the O button.
 Threading mode is switched on.
3. Turn the handwheel.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
WARNING
Risk of injury from moving parts!
Crushing.
The machine must be set to Threading mode.
①
②
③
(3) - Holder
(4) - Bobbin capsule
button.
④
45