Exchanging The Friction Ring - Dürkopp Adler 806N-111-10 Service Instructions Manual

5.6.3 Exchanging the friction ring

Fig. 53: Exchanging the friction ring
(1) - Friction ring
(2) - Screws
The rubberized friction ring (1) is seated on the winder drive wheel.
To replace the friction ring:
1. Loosen the screws (2).
2. Remove the winder lid (3).
3. Exchange the friction ring (1).
4. Replace the winder lid (3).
78
WARNING
Risk of injury from moving parts!
Crushing.
Only set the winder with the machine switched off.
①
②
(3) - Winder lid
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Machine head 121
③