4.10.3 Setting the end position damping of the cylinder
Fig. 32: Setting the end position damping of the cylinder
(1) - End position (hidden)
The speed of the piston rod is reduced approximately 10 mm from the end
position in order to brake the heavy sewing head gently.
Proper setting
The piston rod should move gently into both end positions.
To set the end position damping of the cylinder:
1. Press the Lift/lower sewing head
2. Set the end positions (1) and (2) accordingly.
54
WARNING
Risk of injury from moving parts!
Crushing.
Do not reach into the area of moving machine
parts.
(2) - End position
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Machine head 111
②
①
button repeatedly.