Setting The Lower Position Of The Machine Arm - Dürkopp Adler 806N-111-10 Service Instructions Manual

4.10.1 Setting the lower position of the machine arm

Fig. 30: Setting the lower position of the machine arm
(1) - Latch
(2) - Counternut
Proper setting
In the lowered position of the arm, the hexagonal distance gage 4 (82.8 mm
tall) should fit between the base plate and the underside of the machine
arm.
To set the position of the machine arm:
1. Press the Lift/lower sewing head
 The sewing head lowers.
2. Press the O button.
 Threading mode is switched on.
3. Loosen the counternut (2).
4. Turn the piston rod (3) accordingly.
5. Tighten the counternut (2).
52
WARNING
Risk of injury from moving parts!
Crushing.
The machine must be set to Threading mode.
①
②
(3) - Piston rod
(4) - Distance gage
button.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Machine head 111
④
③