Middle Slide - Dürkopp Adler 806N-111-10 Service Instructions Manual

3. Press Push button 1 repeatedly until the inner frame is situated in the
4. Check the distance of the lateral slides (4) to the middle slide.
5. Correct the distance if necessary: Turn the adjusting wheel at the rear
If the rear adjusting wheel alone is not sufficient:
6. Change the position of the stop screws (3) on the carriage of the middle

7.3 Middle slide

Fig. 92: Middle slide
(1) - Nozzle
The middle slide determines the outer contour of the pocket to be sewn
on. It is sucked against the inner frame.
118
edge folding station and the lateral slides (4) can be moved to the front
by hand.
until the proper distance has been reached.
slide.
Make sure that the eccentrics (2) rests on both stop screws.
WARNING
Risk of injury from moving parts!
Crushing.
Do NOT reach under the middle slide.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Edge folding device
①