Stacker - Dürkopp Adler 806N-111-10 Service Instructions Manual

Stacker

6
Fig. 75: Stacker
The stacker with outfeed roller makes it to possible to stack workpieces
whose lower edge is at least 310 mm from the seam end of the pocket.
Normally, this requirements is met by all parts of trousers and shirts.
The stacker equipped with an advance roller also allows for the stacking
of shorter workpieces. The lower edge of these workpieces is distanced
130 mm and 310 mm from the seam end of the pocket.
The tray of the stacker can be rotated by 180°. The side with the slot is in-
tended for the stacking of shirts with button stay. For all other workpieces,
use the side without the slot.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Stacker
101