Access To The User Interface Intended For Technicians; Calling Up The Start Screen Of The User Interface Intended For Technicians; Calling Up The User Interface Intended For Technicians From; User Interface 2 - Dürkopp Adler 806N-111-10 Service Instructions Manual

9.2 Access to the user interface intended for technicians

There are two ways to access the user interface intended for technicians.
Information
A prompt for the access password to the user interface will be displayed
only once; afterwards, the technician will be able to access any setting
available in the program. For this reason, it is important to exit the program
or to shut down the PC as soon as all service settings have been set via
software.
9.2.1 Calling up the start screen of the user interface intended
To enter the user interface from the Start screen:
1. Navigate to the Start screen,  Operating Instructions 806N.
2. Press the User interface
3. Enter password 25483.
 The User interface intended for technicians appears:
Fig. 113: Calling up the start screen of the user interface intended for technicians

9.2.2 Calling up the user interface intended for technicians from

To enter the user interface from the User interface 2:
1. Navigate to User interface 2,  Operating Instructions 806N.
2. Press the User interface
3. Enter password 25483.
 The User interface intended for technicians appears:
142
for technicians

user interface 2

Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Service settings via software
button.
button.