Dürkopp Adler 806N-111-10 Service Instructions Manual page 162

Service settings via software
Inputs
The inputs are listed in the lower portion. You can switch them on and off
by tapping on them. The inputs are highlighted in green if receiving a sig-
nal. They are displayed in gray if no signal is received.
Button REFNM: Light barrier. Buttons REFX and REFY: X and Y axis.
Assignment of outputs and inputs
The tables shown below list the assignments of the outputs and inputs.
Apart from the wiring diagrams, the appendix contains an additional list of
the outputs and inputs which groups them according to the different areas
on the 806N.
160 Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023