Dürkopp Adler 806N-111-10 Service Instructions Manual page 160

A press on the Outfeed roller
Fig. 134: Test roll-off device
Test outfeed roller speed
This option can be used to test whether the selected speed is suitable or
needs to be corrected.
The speed setting is adjusted on the user interface intended for technicians
( p. 145).
To check the speed of the outfeed roller:
1. Press the Test speed
 All installed rollers (outfeed roller/advance roller) rotate at the entered
Test outfeed roller
This button starts a function test to determine if the outfeed roller is low-
ered / raised.
To check the operation of the outfeed roller:
1. Press the Test outfeed roller
 The outfeed roller is raised/lowered.
2. Press the Test outfeed roller
 The outfeed roller is lowered/raised.
Test advance roller
The advance roller is a piece of additional equipment that is available for
the machine. This button starts a function test to determine if the advance
roller is lowered / raised.
158
speed regardless of whether they are lifted or lowered.
The rollers will switch off again automatically after a certain period of
time.
Service settings via software
button opens the following window:
button.
button.
button again.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023