Table of Contents
Advertisement
38
4.7
Changing the bobbin
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before changing the bobbin.
NOTICE
Property damage may occur!
The surface of the bobbin may become damaged, causing
the bobbin rotation monitor to stop working correctly.
Do NOT use sharp parts to remove the bobbin!
The bobbin change works in the same way on one-needle machines
as on two-needle machines. The only difference is that the hook
into which the bobbin is inserted is turned by 180 degrees for the
left and the right side.
Fig. 20: Changing the bobbin (1)
①
②
③
④
(1) - Bobbin case retainer
(2) - Bobbin
(3) - Slot
⑥
⑤
(4) - Thread guide
(5) - Tensioning spring
(6) - Slot
Operating Instructions D888 e-con - 00.0 - 12/2023
Operation
Advertisement
Table of Contents
