Fig. 111: Setting the light barrier for the coding
(1) - Hole
(2) - Potentiometer
To set the light barrier for the transfer plate coding:
1. Remove the sewing head cover and the carriage ( p. 15).
2. Start up the machine.
The machine performs a reference run.
3. Press the User interface
4. Press the Sewing motor
The transfer plate moves to the side.
5. Use a screwdriver to adjust the potentiometer in order to align the light
6. Press the Exit
7. Press the
The machine performs a reference run and reads the code of the
8. Correct the sensitivity of the light barrier if necessary.
9. Replace the sewing head cover and the carriage ( p. 18).
140
①
barrier.
• Increase the sensitivity: turn clockwise
• Reduce the sensitivity: turn counterclockwise
button.
transfer plate.
②
(3) - Light barrier
button.
button.
button repeatedly until you reach the start screen.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Transfer carriage
③