Setting The Speed Lift/Lower Sewing Head - Dürkopp Adler 806N-111-10 Service Instructions Manual

Machine head 111
Information
Following this adjustment, the upper position of the machine arm will be
determined by the piston rod path of the cylinder.

4.10.2 Setting the speed Lift/lower sewing head

Fig. 31: Setting the speed Lift/lower sewing head
(1) - Throttle valve
Proper setting
The sewing head should move swiftly and evenly.
To set the speed Lift/lower sewing head:
1. Press the Lift/lower sewing head
2. Use the throttle valves (1) and (2) to regulate the air exiting the cylinder.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
WARNING
Risk of injury from moving parts!
Crushing.
Do not reach into the area of moving machine
parts.
①
②
(2) - Throttle valve
button repeatedly.
53