Stitch Regulator And Transmission Lever; Setting The Zero Position Of The Stitch Regulator - Dürkopp Adler 806N-111-10 Service Instructions Manual

Machine head 111
3. Press the Sewing motor
 You are on the sewing motor level:

4.1 Stitch regulator and transmission lever

4.1.1 Setting the zero position of the stitch regulator

Proper setting
The needle bar must not oscillate when the machine is completing a zig-
zag function.
To set the zero position of the stitch regulator:
1. Navigate to the user interface.
2. Press the Lift/lower sewing head
 The sewing head lowers.
3. Set a low speed (100 RPM or less).
4. Press the Sewing motor
 The machine is running.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
button.
WARNING
Risk of injury from moving parts!
Crushing.
The machine must be set to Threading mode.
button.
button.
23