Table of Contents
Advertisement
Maintenance
To lubricate the carriage of the linear rails:
1. Install the grease gun adapter included in the accessory pack.
2. Grease lubrication points (1) and (2) using the grease gun.
The old grease must be pressed out completely.
10.4.3 Lubricating the spherical heads
Information
Use ordinary installation paste (e.g. OKS 260) to lubricate the spherical
heads.
10.5 Servicing the pneumatic system
Setting the operating pressure
Proper setting
Refer to the Technical data ( p. 185) chapter for the permissible
operating pressure. The operating pressure cannot deviate by more than
± 0.5 bar.
Check the operating pressure on a daily basis.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the machine.
Ensure that the machine is only used when the operating pressure
is set correctly.
175
Advertisement
Table of Contents
