Dürkopp Adler 867 Additional Instructions
Durkopp adler 867
Hide thumbs
Also See for 867:
- Durkopp adler (192 pages) ,
- Service instructions manual (164 pages) ,
- Parts list (153 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dürkopp Adler 867
Summary of Contents for Dürkopp Adler 867
- Page 1 Puller Feed Drive Additional Instructions...
- Page 2 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE All rights reserved. Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents, includ- ing extracts, is prohibited without the prior written approval of Dürkopp Adler AG. Copyright ©...
-
Page 3: Table Of Contents
Initializing the puller feed drive ............. 9 Setting other parameters .............. 9 5.2.1 Setting the transmission ratios ............. 9 5.2.2 Setting the puller feed pressure............ 9 5.2.3 Setting puller feed operation............10 Malfunctions ................10 Appendix ................... 11 Additional Instructions 867 - 02.0 - 12/2016... - Page 4 Table of Contents Additional Instructions 867 - 02.0 - 12/2016...
-
Page 5: About This Additional Manual
About this additional manual About this additional manual This additional manual describes the puller feed drive with DAC control. For the standard functions, see the DAC Control Operating Manual. Kits: 0867 591134 0867 591144 Additional Instructions 867 - 02.0 - 12/2016... -
Page 6: Machine Overview
Machine overview Machine overview Fig. 1: Machine overview ① ② ③ ④ (1) - Control panel (3) - Puller feed drive button (2) - Top puller pressure regulator (4) - Top puller Additional Instructions 867 - 02.0 - 12/2016... -
Page 7: Operation
2. Switch on the machine at the main switch (2). 3. Press the puller feed drive (3) button on the machine's arm. The button lights up, the puller feed drive is activated. Additional Instructions 867 - 02.0 - 12/2016... -
Page 8: Setting The Top Puller Pressure
2. Pull the adjustment knob (1) up. 3. Turn the adjustment knob and set the pressure (0 - 6 bar): • clockwise: to increase pressure • counterclockwise: to reduce pressure 4. Push the adjustment knob (1) down. Additional Instructions 867 - 02.0 - 12/2016... -
Page 9: Settings
To change quickly between the feed types, the puller feed type can be pro- grammed to the freely programmable F-key on the control panel (parame- ter t 52 20 = 23). See also DAC Control operating manual. Additional Instructions 867 - 02.0 - 12/2016... -
Page 10: Setting The Puller Feed Operating Mode
2. Open the parameter t 14 21. 3. Set the material compensation value for the top feed puller (0-255). 4. Open the parameter t 14 31. 5. Set the material compensation value for the bottom feed puller (0-255). Additional Instructions 867 - 02.0 - 12/2016... -
Page 11: Service
• 1: In case of rapid stroke adjustment, the puller is relieved of pneu- matic pressure. The pressure of the springs only acts on the mate- rial • 2: Permanently depressurized Additional Instructions 867 - 02.0 - 12/2016... -
Page 12: Setting Puller Feed Operation
Stepper motors not moving • Wires connected incor- • Check the wires. rectly • Puller feed drive not cor- • Check the settings. rectly initialized Additional Instructions 867 - 02.0 - 12/2016... -
Page 13: Appendix
Appendix Appendix Fig. 5: Control wire – puller feed stepper motor Additional Instructions 867 - 02.0 - 12/2016... - Page 14 Appendix Fig. 6: Valve strip – distributor wire 867 Additional Instructions 867 - 02.0 - 12/2016...
- Page 15 Appendix Fig. 7: Pneumatics diagram Fig. 8: Valve block ① ④ ③ ② (1) - Y1.1 and Y2.1 (3) - Y2.4 (2) - Y1.2 (4) - Y3.4 Additional Instructions 867 - 02.0 - 12/2016...
- Page 16 Appendix Additional Instructions 867 - 02.0 - 12/2016...
- Page 18 DÜRKOPP ADLER AG Potsdamer Str. 190 33719 Bielefeld Germany Phone: +49 (0) 521 925 00 E-Mail: service@duerkopp-adler.com www.duerkopp-adler.com...