DA 10 can be obtained from DÜRKOPP ADLER GmbH sales offices using
the following part number:
Container
250 ml
1 l
2 l
5 l
Fig. 142: Lubricating (806N-111)
(1) - Oil filling neck
(2) - Inspection glass
Checking the oil level
To check the oil level:
1. Check the oil level at the inspection glass (3).
The oil level must be between the middle and the upper edge of the
2. Check the oil feed at the inspection glass (2) when the machine is
An air bubble is visible in the inspection glass.
Topping up with oil
To top up with oil:
1. Top up oil through the oil filling neck (1).
The oil must fill 3/4 of the inspection glass (3).
172
Part number
9047 000011
9047 000012
9047 000013
9047 000014
inspection glass (3).
running.
①
②
③
(3) - Inspection glass
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Maintenance